TLC5920DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Linear |
| Additional Feature | COMMON-CATHODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 10MHz |
| Base Part Number | TLC5920 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Output Voltage | 900mV |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1.5W |
| Output Current | 640mA |
| Max Supply Current | 1.6mA |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 30mA |
| Input Characteristics | STANDARD |
| High Level Output Current | -30mA |
| Low Level Output Current | 640mA |
| fmax-Min | 10 MHz |
| Number of Segments | 128 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5920DLR Overview
Its 48-BSSOP (0.295, 7.50mm Width) package is used to save board space. LED drivers design with 16 outputs.As a mounting method, Surface Mount is used.Linear emerges with high efficiency and reliability.The LED driver is capable of operating at a temperature of -20°C~85°C TA.Based on the frequency of 10MHz, it operates.In this case, it operates with terminations of 0.The LED light driver has a base configuration of 48 pins.Based on our estimates, there are 128 segments.The base part number for this LED driver is TLC5920.The voltage of 5.5V is acceptable.There are 48 pins on it.Moreover, it can be classified as Display Drivers due to its characteristics.This device requires a minimum input voltage of 4.5V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.5.5V is the maximum value of supply current that can be used.As long as the supply current is less than 1.6mA, this device can provide high efficiency.640mA is the maximum current the load can handle.It is necessary to power systems with a voltage of 5VThe voltage at the output terminal is 900mV.Moreover, this LED driver contains a COMMON-CATHODE.
TLC5920DLR Features
Available in the 48-BSSOP (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 10MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 900mV
COMMON-CATHODE
TLC5920DLR Applications
There are a lot of Texas Instruments TLC5920DLR LED Driver ICs applications.
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lighting
- Flicker-free LED Lighting using R1580N
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED headlights
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
