TLC5920DLRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | COMMON-CATHODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 10MHz |
| Base Part Number | TLC5920 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Output Voltage | 900mV |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 1.5W |
| Output Current | 640mA |
| Max Supply Current | 1.6mA |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 30mA |
| High Level Output Current | -30mA |
| Low Level Output Current | 640mA |
| fmax-Min | 10 MHz |
| Number of Segments | 128 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5920DLRG4 Overview
On the board, there is also a 48-BSSOP (0.295, 7.50mm Width) package that saves space.LED drivers are designed with 16 outputs.It is possible to mount the led driver using Surface Mount.With high efficiency, it emerges as a Linear.It is possible for the led light driver to operate at a temperature of -20°C~85°C TA.On the basis of the frequency 10MHz, it operates.In this case, it uses 48 terminations.The LED light driver has a base configuration of 48 pins.In total, it includes 128 segments.LED drivers have a base part number of TLC5920.The voltage of 5.5V is acceptable.In addition, it has 48 pins.It is also classified into Display Drivers according to its characteristics.It operates at a voltage of 4.5V as its minimal input voltage.It achieves maximum efficiency with a minimal voltage supply of 4.5V.In terms of supply current, there is a maximum value of 5.5V.When the maximum supply current is below 1.6mA, it is capable of delivering high efficiency.There is no current available to supply to the load.It is necessary to power systems with a voltage of 5VCurrently, it is generating 900mV voltage.Aside from that, it has COMMON-CATHODE as a characteristic.
TLC5920DLRG4 Features
Available in the 48-BSSOP (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 10MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 900mV
COMMON-CATHODE
TLC5920DLRG4 Applications
There are a lot of Texas Instruments TLC5920DLRG4 LED Driver ICs applications.
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- A- lamps
- Other Electronic Devices
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- Museum lighting
