TLC59210IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Power Switch |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | TLC59210 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 5μA |
| Output Current | 200mA |
| Max Supply Current | 5μA |
| Voltage - Output | 30V |
| Topology | Boost |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Number of Segments | 8 |
| Multiplexed Display Capability | NO |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59210IN Overview
Its 20-DIP (0.300, 7.62mm) package is used to save board space. For the design of these LED drivers, 8 outputs are used.We are using Through Hole as the mounting method.It emergys as a Power Switch with high efficiency and reliable performance.-40°C~85°C TA is the operating temperature of the led driver.In the 1MHz frequency range, it operates.The system operates with a termination of 0.Its configuration is based on 20 pins.Based on our estimates, there are 8 segments.There is a base part number TLC59210 for this LED driver.Ideally, the supply voltage should be 5.5V.It has a voltage output of 30V.20 pins are used on the device.In addition, its characteristics are classified into Display Drivers.A minimal input voltage of 3V is required for it to operate.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.It reaches 5.5V when the maximum supply current is allowed.Its high efficiency is based on the fact that the maximal supply current should not exceed 5μA.Loads can only be powered by 200mA current.
TLC59210IN Features
Available in the 20-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 4.5V
TLC59210IN Applications
There are a lot of Texas Instruments TLC59210IN LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for Tablets and Note PCs
- Scanners and Handy Terminals
- Stage and Studio lighting
- OLED power supply for portable equipment
- Constant Voltage Power Source for portable equipment
- Amusement Machines
- Dimmable LED for vehicle interiors
- LED Lightings for Industrial Equipment
