TLC59213AIN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Number of Functions | 8 |
| Supply Voltage | 5.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | TLC59213 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Nominal Supply Current | 4.8mA |
| Output Current | 400mA |
| Max Supply Current | 13mA |
| Propagation Delay | 250 ns |
| Min Input Voltage | 4.5V |
| Logic Function | D-Type, Latch |
| Max Input Voltage | 13.2V |
| Logic Type | D-Type Latch |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 8 |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Interface Standard | GENERAL PURPOSE |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59213AIN Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. A D-Type Latch logic type is used in this electrical device. Electronic components are mounted using the Through Hole method. It operates at a voltage of 4.5V~13.2V. It is -40°C~85°C at the operating temperature. In this device, there are 20 terminations that have been designed. As a member of the TLC59213 family, it falls under that category. The device works with a voltage of 5.5V for its supply voltage. With 20 pins, it is equipped. In addition, it is designed with a pin number of 20. The part belongs to the Display Drivers subcategory. The 400mA output current gives it maximum design flexibility. There is 200mA output current at the low level. 200mA is set as the high level output current.
TLC59213AIN Features
20-DIP (0.300, 7.62mm) package
TLC59213 family
20 pin count
20 pins
TLC59213AIN Applications
There are a lot of Texas Instruments TLC59213AIN Latches applications.
- Up-Down Johnson
- Automotive Infotainment
- Flip-flops
- Parallel Input
- Storage
- Decade counting
- Shift Registers
- Serial Output Register
- Registers
- Shift right register
