TLC59213IN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~13.2V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5.5V |
| Terminal Pitch | 2.54mm |
| Frequency | 2MHz |
| Base Part Number | TLC59213 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Nominal Supply Current | 4.8mA |
| Output Current | -500mA |
| Max Supply Current | 13mA |
| Propagation Delay | 250 ns |
| Min Input Voltage | 4.5V |
| Logic Function | D-Type, Latch |
| Max Input Voltage | 13.2V |
| Logic Type | D-Type Latch |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 8 |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Interface Standard | GENERAL PURPOSE |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59213IN Overview
A package called 20-DIP (0.300, 7.62mm) contains it. A Tube package is used to package it. It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Latch. This electronic part is mounted in the way of Through Hole. The supply voltage of the device is 4.5V~13.2V. There is -40°C~85°C operating temperature. A device such as this has 20 terminations designed. The family it belongs to is TLC59213. The device works with a voltage of 5.5V for its supply voltage. There are 20 pins on it. With the design of the board, there are only 20 pins. This part is included in Display Drivers. It features maximum flexibility in design due to -500mA output current. In the low level output current, the value is set to 200mA. In the high level output current, the value is set to 200mA.
TLC59213IN Features
20-DIP (0.300, 7.62mm) package
TLC59213 family
20 pin count
20 pins
TLC59213IN Applications
There are a lot of Texas Instruments TLC59213IN Latches applications.
- Stacked or Push-Down Registers
- Decade counting
- Clocks
- Data acquisition
- Parallel Input
- Parallel data synchronization
- Avionics
- Parallel data storage
- Hammer
- A/D converters
