Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
32-PowerTSSOP (0.240, 6.10mm Width) |
Number of Pins |
32 |
Weight |
181.096754mg |
Operating Temperature |
-20°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Type |
Linear |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
HTS Code |
8542.39.00.01 |
Subcategory |
Display Drivers |
Max Power Dissipation |
3.9W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Frequency |
20MHz |
Base Part Number |
TLC5921 |
Pin Count |
32 |
Number of Outputs |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Nominal Supply Current |
50mA |
Power Dissipation |
3.9W |
Output Current |
90mA |
Max Supply Current |
50mA |
Voltage - Output |
17V |
Topology |
Shift Register |
Output Characteristics |
CONSTANT-CURRENT |
Input Characteristics |
STANDARD |
Current - Output / Channel |
80mA |
Internal Switch(s) |
Yes |
High Level Output Current |
-1mA |
Low Level Output Current |
1mA |
fmax-Min |
20 MHz |
Number of Segments |
16 |
Voltage - Supply (Min) |
4.5V |
Multiplexed Display Capability |
NO |
Display Mode |
SEGMENT |
Data Input Mode |
SERIAL |
Height |
1.2mm |
Length |
11mm |
Width |
6.2mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLC5921DAP Overview
Using its 32-PowerTSSOP (0.240, 6.10mm Width) package, it is possible to save board space. LED drivers are designed with 16 outputs.To mount, use Surface Mount.In this case, it emerges as a Linear with a high efficiency.-20°C~85°C TA is the operating temperature of the led driver.It operates at 20MHz frequency.It operates using 32 terminations.The base of this board is configured as 32 pins.There may be undetermined failures if the voltage supply falls below 4.5V.In total, it includes 16 segments.The mount is on its way to Surface Mount.LED drivers can be found under the base part number TLC5921.5.5V is a maximum acceptable voltage for the supply.This device produces a voltage of 17V volts.There are 32 pins on it.Furthermore, it can be classified as Display Drivers based on its characteristics.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.When the supply current should be less than 50mA, the device will provide high efficiency.A load can be supplied with 90mA current.Systems require 5V voltage to operate.
TLC5921DAP Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
TLC5921DAP Applications
There are a lot of Texas Instruments TLC5921DAP LED Driver ICs applications.
- Stage and Studio lighting
- Portable lighting
- Street lighting
- Replacement lamps
- Gallery lighting
- Amusement Machines
- Down lighting
- Panel lighting
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices