TLC5921DAPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5921 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 20MHz |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5921DAPR Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package saves space on the board. LED drivers are designed with 16 outputs.The mounting method adopted is Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.It is possible for the led driver ic to function normally at -20°C~85°C TA.There are 32 terminations that are designed to operate with it.This module has 32 pins as its base.16 segments exist.There is a mounting of it by Surface Mount.This LED driver can be found under the base part number TLC5921.There is no problem with the voltage of 5.5V.The output voltage of the device is 17V.In addition, it has 32 pins.Moreover, it can be classified as Display Drivers due to its characteristics.This device requires a minimum input voltage of 4.5V.For maximum efficiency, it operates at the minimal voltage of 4.5V.Supply current is limited to 5.5V at its maximum value.Whenever the supply current is lower than 50mA, it can provide high efficiency.80mA is the maximum amount of current that can be supplied to the load.The internal voltages needed to power systems is 5V.It is capable of fulfilling its full functionality when the switching frequency remains at 20MHz.
TLC5921DAPR Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Supply voltage of 5V
Operating with the supply voltage of 5V
Switching frequency of 20MHz
TLC5921DAPR Applications
There are a lot of Texas Instruments TLC5921DAPR LED Driver ICs applications.
- OLED power supply for portable equipment
- Replacement lamps
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- Down lights
- LED headlights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
- Constant Voltage Power Source for portable equipment
