TLC5922DAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight, Lighting, Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5922 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.9W |
| Output Current | 90mA |
| Max Supply Current | 65mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5922DAP Overview
Additionally, there is a 32-PowerTSSOP (0.240, 6.10mm Width) package for saving space.For the design of this LED driver, 16 outputs are used.The mounting method adopted is Surface Mount.When it emerges as a Linear, it performs extremely well and is highly reliable.-20°C~85°C TA is a valid operating temperature for the led driver.There are significant benefits for Backlight, Lighting, Signage.In this case, the frequency is 30MHz.The terminations 32 are designed for its operation.The LED light driver has a base configuration of 32 pins.The segment count is 16.Part number TLC5922 represents this LED driver.Ideally, the supply voltage should be 5.5V.There is 17V voltage output from this device.There are 32 pins on it.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 3V volts, it can operate.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.5.5V is the maximum value of supply current that can be used.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 65mA.It is possible to supply the load with 90mA current.
TLC5922DAP Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5922DAP Applications
There are a lot of Texas Instruments TLC5922DAP LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- General lighting
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
- Constant Voltage Power Source for portable equipment
- Medical surgery lighting
- Scanners and Handy Terminals
