TLC5923DAP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5923 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.9W |
| Output Current | 90mA |
| Max Supply Current | 65mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5923DAP Overview
There is also a 32-PowerTSSOP (0.240, 6.10mm Width) package that is used to save space on the board. LED drivers have a total of 16 outputs that are used in the design of the drivers.It is mounted using Surface Mount.This emerges as a Linear with high efficiency and reliability.This LED driver can be operated at a temperature of -40°C~85°C TA. Backlight has considerable advantages.It is designed to work with 32 terminations.There are 32 pins used to form the base of its configuration.16 segments are present.TLC5923 is the base part number for the LED driver.5.5V is an acceptable maximum value for the supply voltage.The output voltage of the device is 17V.There are 32 pins on this device.In addition, its characteristics are classified into Display Drivers.A minimal input voltage of 3V is required for it to operate.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.There is 5.5V maximum value for supply current.When the maximum supply current is below 65mA, the device can deliver high efficiency.It is possible to supply the load with 90mA current.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.
TLC5923DAP Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5923DAP Applications
There are a lot of Texas Instruments TLC5923DAP LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- Down lights
- White LED Backlight for portable equipment
- Linear fluorescent
- Down lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Panel lighting
- Replacement lamps
- Architectural lighting
