TLC5923DAPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5923 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
| Max Supply Current | 65mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5923DAPG4 Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package saves space on the board. LED drivers designed using this technology use 16 outputs.Surface Mount is used for mounting the led light driver.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.-40°C~85°C TA is the operating temperature and it works fine.Backlight has many benefits.There are 32 terminations that are designed to operate with it.There are 32 pins used to form the base of its configuration.The segment count is 16.It's under the TLC5923 base part number.Ideally, the supply voltage should be 5.5V.17V is the voltage output.A total of 32 pins are present on this device.In addition, it can be classified as Display Drivers according to its characteristics.It operates with the minimal input voltage of 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.5.5V is the maximum value of supply current that can be used.Its high efficiency is based on the fact that the maximal supply current should not exceed 65mA.There is no current that can be supplied to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 30MHz.
TLC5923DAPG4 Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5923DAPG4 Applications
There are a lot of Texas Instruments TLC5923DAPG4 LED Driver ICs applications.
- OLED power supply for portable equipment
- Medical surgery lighting
- LED Lightings for Inspection Devices
- Down lighting
- Linear fluorescent
- Replacement lamps
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Industrial Equipment
- Gallery lighting
- Sports Facility Lighting
