TLC5923RHBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.9W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | TLC5923 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 3.9W |
| Output Current | 80mA |
| Max Supply Current | 65mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5923RHBTG4 Overview
Board space is saved by its 32-VFQFN Exposed Pad package.These LED drivers have 16 outputs.For mounting, it uses the Surface Mount method.In this case, the Linear emerges as highly efficient and reliable.At -40°C~85°C TA, the led driver is capable of operating.As a result, Backlight is likely to benefit greatly.It operates at 30MHz frequency.A termination of 32 is used to operate the LED driver.This LED driver is configured with a base of 32 pins.A total of 16 segments are estimated.The LED driver is based on part number TLC5923.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.A voltage of 17V is produced by it.In addition, it has 32 pins.According to its characteristics, it is also categorized into Display Drivers.This device operates with a minimum input voltage of 3V volts.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.Whenever the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is below 65mA, it is capable of delivering high efficiency.There is no current available to supply to the load.
TLC5923RHBTG4 Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5923RHBTG4 Applications
There are a lot of Texas Instruments TLC5923RHBTG4 LED Driver ICs applications.
- OLED power supply for portable equipment
- Flicker-free LED Lighting using R1580N
- Down lights
- LED Lighting PFCs, Linear Dimmable
- Refrigeration lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- General lighting
- Constant Voltage Power Source for portable equipment
- Scanners and Handy Terminals
