TLC5924DAP
| Parameters | |
|---|---|
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 80mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 5.318W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5924 |
| Pin Count | 32 |
| Max Output Current | 80mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 5.318W |
| Output Current | 90mA |
| Max Supply Current | 65mA |
| Voltage - Output | 15V |
TLC5924DAP Overview
The 32-PowerTSSOP (0.240, 6.10mm Width) package saves space on the board. Mounting is done according to the Surface Mount method.It emergys as a Linear with high efficiency and reliable performance.At -40°C~85°C TA, the led driver is capable of operating.Backlight provides many benefits.It operates with 32 terminations.The base of this board is configured as 32 pins.A total of 16 segments are estimated.TLC5924 is the base part number for this LED driver.An acceptable maximum value for the supply voltage is 5.5V.The voltage output by it is 15V.32 pins are available on the device.Additionally, it is categorized into Display Drivers according to its characteristics.The minimal input voltage is 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.In terms of supply current, 5.5V is the maximum value.In order to maintain maximum efficiency, the supply current cannot exceed 65mA.There is no current available to supply to the load.This electronic component can fully perform when the switching frequency is 30MHz.When operating with a maximum output current of 80mA, it can deliver all the benefits of a LED driver.
TLC5924DAP Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5924DAP Applications
There are a lot of Texas Instruments TLC5924DAP LED Driver ICs applications.
- Scanners and Handy Terminals
- LED Lightings for Inspection Devices
- LED Lighting PFCs, Linear Dimmable
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Street lighting
- A- lamps
- Auxiliary lights for on-vehicle cameras
