TLC5924DAPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 32 |
| Max Output Current | 80mA |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 5.318W |
| Nominal Supply Current | 65mA |
| Power Dissipation | 5.318W |
| Max Supply Current | 65mA |
| Current - Output | 80mA |
| Voltage - Output | 15V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.15mm |
| Length | 11mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5924DAPG4 Overview
In order to save board space, the led driver uses the HTSSOP EP package. It operates on the basis of the frequency of 30MHz.The operation of this system is supported by 32 terminations.The base of this board is configured as 32 pins.A total of 16 segments are estimated.It is acceptable for the voltage to be 5.5V.There is 15V voltage output from the device.32 pins are used on the device.As a result, it can also be classified as Display Drivers.It operates with the minimal input voltage of 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.In the case of supply current, there is a maximum value of 5.5V.As long as the supply current is less than 65mA, this device can provide high efficiency.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.The operating temperature should be higher than -40°C so as to realize stable operation.The maximum output current of 80mA allows it to deliver all benefits of a LED driver.It comes with an interface chip marked LED DISPLAY DRIVER.Keep the part's output current at 80mA volts.
TLC5924DAPG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5924DAPG4 Applications
There are a lot of Texas Instruments TLC5924DAPG4 LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Medical surgery lighting
- Street lighting
- High-end retail lighting
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Replacement lamps
- Panel lighting
