TLC5924DAPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerTSSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 181.096754mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 5.318W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5924 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Max Output Current | 80mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 65mA |
| Power Dissipation | 5.318W |
| Output Current | 80mA |
| Max Supply Current | 65mA |
| Voltage - Output | 15V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 11mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5924DAPR Overview
It saves board space with the 32-PowerTSSOP (0.240, 6.10mm Width) package. LED drivers use 16 outputs for their design.It is possible to mount the led driver using Surface Mount.When it emerges as a Linear, it performs extremely well and is highly reliable.-40°C~85°C TA is the operating temperature and it works fine.The benefits of Backlight are considerable.This system operates at 30MHz frequency.It operates with 32 terminations.Its configuration is based on 32 pins.A total of 16 segments are estimated.It's under the TLC5924 base part number.There is no problem with the voltage of 5.5V.The output voltage of the device is 15V.The device has a pin count of 32.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.The minimal input voltage is 3V.To meet high efficiency standards, it works with a voltage of 3V.Supply current is limited to 5.5V at its maximum value.If the maximum supply current is less than 65mA, the device is capable of providing high efficiency.Loads can only be powered by 80mA current.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 80mA.
TLC5924DAPR Features
Available in the 32-PowerTSSOP (0.240, 6.10mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5924DAPR Applications
There are a lot of Texas Instruments TLC5924DAPR LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- General lighting
- Architectural lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Industrial Equipment
- High-end retail lighting
- Street lighting
- A- lamps
