TLC5925IDBQRG4
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Frequency | 30MHz |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 45mA |
| Power Supplies | 3.3/5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.6W |
| Nominal Supply Current | 13mA |
| Power Dissipation | 1.6W |
| Current - Output | 45mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5925IDBQRG4 Overview
There is also a SSOP package that is used to save space on the board. For the design of these LED drivers, 16 outputs are used.Based on the frequency of 30MHz, it operates on the basis of a pulse.It operates with 24 terminations.With a base of 24, this LED light driver is configured.Segments counted are 16.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.There is a voltage output of 17V.There are 24 pins on it.In addition, a Display Drivers is assigned based on the characteristics of the object.The minimum input voltage for this device is 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.5.5V is the maximum value of supply current that can be used.In order to ensure stable operation, the operating temperature should not exceed 85°C.For stable operation, the operating temperature should be higher than -40°C.A LED driver that operates at 45mA output current provides all the benefits of a LED driver.LED DISPLAY DRIVER is the interface IC that the part is equipped with.Maintain the part's output current at 45mA.
TLC5925IDBQRG4 Features
Available in the SSOP package
Frequency of 30MHz
TLC5925IDBQRG4 Applications
There are a lot of Texas Instruments TLC5925IDBQRG4 LED Driver ICs applications.
- Panel lighting
- LED Lightings for Inspection Devices
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
- Portable lighting
- Sports Facility Lighting
- Architectural lighting
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
