TLC5925IDWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | TLC5925 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 45mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13mA |
| Power Dissipation | 2.2W |
| Output Current | 45mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5925IDWRG4 Overview
As a result of its 24-SOIC (0.295, 7.50mm Width) package, it helps to save board space on the board. The LED driver's design uses 16 outputs.The led light driver is mounted using Surface Mount.When it emerges as a Linear, it performs extremely well and is highly reliable.The led light driver is capable of working normally at -40°C~125°C TA.There are considerable benefits for Signage.Based on the frequency of 30MHz, it operates.24 terminations are used in its operation.There are 24 pins used to form the base of its configuration.A total of 16 segments have been created.It is under the base part number TLC5925 that you can find this LED driver.In this case, 5.5V is acceptable.The voltage output by it is 17V.24 pins are available on the device.Further, its characteristics allow it to be classified as Display Drivers.This device requires a minimum input voltage of 3V.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.The allowable maximum value of supply current reaches 5.5V.45mA is the maximum current the load can handle.Even when operating at a maximal output current of 45mA, it is capable of delivering all the benefits of a LED driver.
TLC5925IDWRG4 Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
TLC5925IDWRG4 Applications
There are a lot of Texas Instruments TLC5925IDWRG4 LED Driver ICs applications.
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- Down lighting
- LED Lightings for Inspection Devices
- Medical surgery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Dimmable LED for vehicle interiors
