TLC5925IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5925 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 45mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 13mA |
| Power Dissipation | 1.1W |
| Output Current | 45mA |
| Max Supply Current | 13mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5925IPWR Overview
There is also a 24-TSSOP (0.173, 4.40mm Width) package that is used to save space on the board. A LED driver using this design has 16 outputs.The mounting method adopted is Surface Mount.In this case, the Linear emerges as highly efficient and reliable.LED drivers capable of operating at -40°C~125°C TA can be used.There are considerable benefits for Signage.There are 24 terminations that are designed to operate with it.It has a base configuration of 24 pins.The number of segments is estimated to be 16.This LED driver can be found under the base part number TLC5925.5.5V is an acceptable voltage.There is 17V voltage output from it.There are 24 pins on it.According to its characteristics, it is also categorized into Display Drivers.With 3V as the minimal input voltage, it operates.For maximum efficiency, it operates at the minimal voltage of 3V.When the maximum supply current is allowed, the value reaches 5.5V.As long as the maximum supply current is less than 13mA, this device is capable of providing high efficiency.There is no current that can be supplied to the load.Electronic components can function properly when their switching frequency is set to 30MHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 45mA.
TLC5925IPWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Switching frequency of 30MHz
TLC5925IPWR Applications
There are a lot of Texas Instruments TLC5925IPWR LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Portable lighting
- Stage and Studio lighting
- Down lights
- OLED power supply for portable equipment
- Sports Facility Lighting
- White LED Backlight for portable equipment
- Architectural lighting
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
