TLC5926IDBQRG4
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 30MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.6W |
| Nominal Supply Current | 20mA |
| Power Dissipation | 1.6W |
| Max Supply Current | 20mA |
| Current - Output | 120mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5926IDBQRG4 Overview
The board's SSOP package saves space. As a result, it operates on the basis of frequency 30MHz.There are 24 terminations that are designed to operate with it.There are 24 pins on the base of this LED driver.Based on our estimates, there are 16 segments.It's acceptable for the voltage to be 5.5V.The device has a voltage output of 17V volts.On it, there are 24 pins.In addition, it can be classified as Display Drivers according to its characteristics.It operates with the minimal input voltage of 3V.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.In the case of supply current, there is a maximum value of 5.5V.If the maximum current supply is less than 20mA, this device provides high efficiency.It is important not to exceed 85°C in order to ensure stable operation.Maintaining a temperature above -40°C is essential for stabilizing operation.In this part, LED DISPLAY DRIVER represents the interface IC.Maintain the part's output current at 120mA.
TLC5926IDBQRG4 Features
Available in the SSOP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5926IDBQRG4 Applications
There are a lot of Texas Instruments TLC5926IDBQRG4 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- General lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- OLED power supply for portable equipment
- Architectural lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
- LED Lightings for Inspection Devices
- High-end retail lighting
