TLC5926IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TLC5926 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.2W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5926IDWR Overview
Space is saved using its 24-SOIC (0.295, 7.50mm Width) package. For the design of this LED driver, 16 outputs are used.Surface Mount represents this mounting method.There is no doubt that this is a very efficient and reliable Linear.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.It is clear that Signage will benefit from the program.There are 24 terminations that are designed to operate with it.The LED light driver is configured with a base of 0 pins.It consists of 16 segments.It is under the base part number TLC5926 that you can find this LED driver.The supply voltage of 5.5V is an acceptable maximum value.17V is the output voltage.24 pins are on the device.Further, its characteristics allow it to be classified as Display Drivers.At its minimal input voltage, it operates at 3V.It achieves maximum efficiency with a minimal voltage supply of 3V.Currently, the supply current can only reach 5.5V.If the maximum current supply is less than 20mA, this device provides high efficiency.It is possible to supply the load with 120mA current.This electronic component may perform its functions fully if the switching frequency is maintained at 30MHz.
TLC5926IDWR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5926IDWR Applications
There are a lot of Texas Instruments TLC5926IDWR LED Driver ICs applications.
- Linear fluorescent
- Architectural lighting
- LED headlights
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- Amusement Machines
- Other Electronic Devices
- White LED Backlight for portable equipment
- Gallery lighting
