TLC5926IPWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5926 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.9W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5926IPWPRG4 Overview
Additionally, there is a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package for saving space.In this LED driver, there are 16 outputs.It is mounted using Surface Mount.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~85°C TA. Signage has considerable advantages.30MHz is the frequency in which it operates.It operates with 24 terminations.This configuration is built upon 24 pins.There are 16 segments.Part number TLC5926 represents this LED driver.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.There is a voltage output of 17V.A total of 24 pins are present on this device.According to its characteristics, it is also categorized into Display Drivers.It operates with the minimal input voltage of 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.It is possible to supply current up to 5.5V.If the maximum supply current is less than 20mA, the device is capable of providing high efficiency.120mA is the maximum amount of current that can be supplied to the load.
TLC5926IPWPRG4 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5926IPWPRG4 Applications
There are a lot of Texas Instruments TLC5926IPWPRG4 LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- A- lamps
- LED Lightings for Industrial Equipment
- Architectural lighting
- Down lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Other Electronic Devices
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
