TLC5926QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5926 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Max Output Current | 120mA |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.9W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Quiescent Current | 11mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5926QPWPRQ1 Overview
To save space on the board, it has a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. In this LED driver, there are 16 outputs.As far as mounting is concerned, Surface Mount is adopted.As a result, it appears as a Linear with a high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.Taking advantage of Signage has considerable benefits.The system operates on the basis of the frequency 30MHz.The operation of this system is supported by 24 terminations.The base of this board is configured as 24 pins.Based on our estimates, there are 16 segments.It is under the base part number TLC5926 that you can find this LED driver.A maximum supply voltage of 5.5V is acceptable.There is 17V voltage output from it.On it, there are 24 pins.As a result, its characteristics can also be categorized as Display Drivers.A minimal input voltage of 3V is required for it to operate.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.There is 5.5V maximum value for supply current.When the maximum supply current is less than 20mA, this device is able to provide high efficiency.120mA is the maximum current the load can handle.At maximum output current 120mA, it will deliver all the benefits of a LED driver.The LED driver belonging to the Automotive, AEC-Q100 series has many applications.A current of 11mA is consumed in the absence of external influences.
TLC5926QPWPRQ1 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
TLC5926QPWPRQ1 Applications
There are a lot of Texas Instruments TLC5926QPWPRQ1 LED Driver ICs applications.
- Down lighting
- Sports Facility Lighting
- Medical surgery lighting
- Scanners and Handy Terminals
- White LED Backlight for portable equipment
- Auxiliary lights for on-vehicle cameras
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for portable equipment
- High-end retail lighting
- Portable lighting
