TLC5927IDBQRG4
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 30MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.6W |
| Nominal Supply Current | 20mA |
| Power Dissipation | 1.6W |
| Max Supply Current | 20mA |
| Current - Output | 120mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5927IDBQRG4 Overview
The board's SSOP package saves space. As a result, it operates on the basis of frequency 30MHz.It operates with 24 terminations.The LED light driver is configured with a base of 0 pins.The number of segments is estimated to be 16.The supply voltage of 5.5V is an acceptable maximum value.Its output voltage is 17V.On this device, there are 24 pins.Additionally, it can be classified as Display Drivers based on its characteristics.With a minimum input voltage of 3V volts, it can operate.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.Supply current is limited to 5.5V at its maximum value.Its high efficiency is based on the fact that the maximal supply current should not exceed 20mA.It is important not to exceed 125°C in order to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.It comes with an interface chip marked LED DISPLAY DRIVER.Make sure the output current is set to 0 for the part.
TLC5927IDBQRG4 Features
Available in the SSOP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5927IDBQRG4 Applications
There are a lot of Texas Instruments TLC5927IDBQRG4 LED Driver ICs applications.
- High-end retail lighting
- Dimmable LED for vehicle interiors
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- Medical surgery lighting
- Architectural lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- White LED Backlight for portable equipment
- Stage Lighting and Signage
- LED Lighting PFCs, Linear Dimmable
