TLC5927IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 30MHz |
| Base Part Number | TLC5927 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.2W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5927IDWR Overview
24-SOIC (0.295, 7.50mm Width) saves board space. Typically, LED drivers have 16 outputs.For mounting, it uses the Surface Mount method.As a Linear, it has high efficiency and reliability.-40°C~85°C TA is a valid operating temperature for the led driver.There are considerable benefits for Signage.Using the frequency of 30MHz, it operates.A termination of 24 is used to operate the LED driver.The LED light driver has a base configuration of 24 pins.16 segments exist.It is under the base part number TLC5927 that you can find this LED driver.5.5V is an acceptable voltage.17V is the output voltage.On it, there are 24 pins.In addition, its characteristics are classified into Display Drivers.The input voltage must be minimally 3V.It works with the minimal supply voltage of 3V to meet highest efficiency standards.When the maximum supply current is allowed, the value reaches 5.5V.When the maximum supply current is less than 20mA, the device is able to provide a high level of efficiency.The current that can be supplied to the load is 120mA.
TLC5927IDWR Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5927IDWR Applications
There are a lot of Texas Instruments TLC5927IDWR LED Driver ICs applications.
- Scanners and Handy Terminals
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- Architectural lighting
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Sports Facility Lighting
- Stage and Studio lighting
- Medical surgery lighting
