TLC5927IPWPRG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 2.9W |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.9W |
| Max Supply Current | 20mA |
| Current - Output | 120mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5927IPWPRG4 Overview
The board's HTSSOP EP package saves space. It operates on the basis of the frequency of 30MHz.24 terminations are designed for its operation.There are 24 pins on its base.A total of 16 segments are estimated.The voltage of 5.5V is acceptable.The output voltage is 17V.A device with 24 pins is available.As a result, it can also be classified as Display Drivers.Initially, it accepts a voltage of 3V.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.The device can deliver high efficiency when the maximal supply current is less than 20mA.In order to ensure stable operation, the operating temperature should not exceed 125°C.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.There is a current of 120mA can be supplied to the load.
TLC5927IPWPRG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 3.3V
TLC5927IPWPRG4 Applications
There are a lot of Texas Instruments TLC5927IPWPRG4 LED Driver ICs applications.
- Amusement Machines
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- Museum lighting
- Other Electronic Devices
- Stage and Studio lighting
- Gallery lighting
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- A- lamps
