TLC5927QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TLC5927 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 2.9W |
| Output Current | 120mA |
| Quiescent Current | 11mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5927QPWPRQ1 Overview
The board's 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space. A LED driver with 16 outputs is designed.It is possible to mount the led driver using Surface Mount.As a Linear, it has high efficiency and reliability.-40°C~85°C TA is the operating temperature and it works fine.The benefits are considerable for Signage.In the 30MHz frequency range, it operates.In this case, the termination value is 24.The LED light driver has a base configuration of 24 pins.16 segments are present.The LED driver can be found under the base part number TLC5927.The voltage of 5.5V is acceptable.There is a voltage output of 17V.On it, there are 24 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.With a minimum input voltage of 3V volts, it can operate.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.It reaches 5.5V when the maximum supply current is allowed.A load can be supplied with 120mA current.LED drivers belonging to the series Automotive, AEC-Q100 are important components in a wide range of applications.A current of 11mA is consumed in the absence of external influences.
TLC5927QPWPRQ1 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
TLC5927QPWPRQ1 Applications
There are a lot of Texas Instruments TLC5927QPWPRQ1 LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Refrigeration lighting
- LED Lighting PFCs, Linear Dimmable
- General lighting
- Portable lighting
- High-end retail lighting
- Scanners and Handy Terminals
- Replacement lamps
