TLC59283DBQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 35MHz |
| Base Part Number | TLC59283 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11mA |
| Output Current | 35mA |
| Max Supply Current | 11mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 45mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59283DBQ Overview
Board space is saved by its 24-SSOP (0.154, 3.90mm Width) package.For the design of this LED driver, 16 outputs are used.This mounting method is Surface Mount.This emerges as a Linear with high efficiency and reliability.When the temperature is -40°C~85°C TA, it can work normally.It operates at 35MHz frequency.For its operation, terminations with a value of 0 are used.In this LED driver, the base is configured as 24.A voltage supply below 3V may cause undetermined failures.There are 16 segments.Surface Mount is mounted in the way.It is under the base part number TLC59283 that the LED driver can be found.It is acceptable to operate with a supply voltage of 5.5V.The voltage output by it is 10V.In addition to Display Drivers, it is also classified by its characteristics.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.As long as the maximum supply current is less than 11mA, this device is capable of providing high efficiency.There is no current available to supply to the load.
TLC59283DBQ Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC59283DBQ Applications
There are a lot of Texas Instruments TLC59283DBQ LED Driver ICs applications.
- Medical surgery lighting
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for portable equipment
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Industrial Equipment
- Gallery lighting
- Other Electronic Devices
- General lighting
