TLC59283DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 35MHz |
| Base Part Number | TLC59283 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 11mA |
| Output Current | 35mA |
| Max Supply Current | 11mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 45mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59283DBQR Overview
To save board space, it uses the 24-SSOP (0.154, 3.90mm Width) package. These LED drivers have 16 outputs.To mount, use Surface Mount.This emerges as a Linear with high efficiency and reliability.At -40°C~85°C TA, the led driver is capable of operating.The system operates on the basis of the frequency 35MHz.The system operates with a termination of 0.This configuration is built upon 24 pins.A voltage supply less than 3V could result in undetermined failures.It is estimated that there are 16 segments.Surface Mount is mounted on it.TLC59283 is the base part number for the LED driver.It is acceptable to supply voltages of 5.5V.There is 10V voltage output from the device.As a result, it can also be classified as Display Drivers.This system is designed to operate at a minimum voltage of 3V to achieve maximum efficiency.When the maximum supply current is below 11mA, it is capable of delivering high efficiency.35mA is the maximum current the load can handle.
TLC59283DBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC59283DBQR Applications
There are a lot of Texas Instruments TLC59283DBQR LED Driver ICs applications.
- LED headlights
- Medical surgery lighting
- Down lighting
- LED backlight driver for LCD displays for portable equipment
- Stage and Studio lighting
- General lighting
- Constant Voltage Power Source for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Replacement lamps
- Power source for accessories such as car audios, car navigation systems, and ETC systems
