TLC5928DBQRG4
| Parameters | |
|---|---|
| Package / Case | SSOP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 35MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1.782W |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1.782W |
| Max Supply Current | 40μA |
| Current - Output | 35mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TLC5928DBQRG4 Overview
The board's SSOP package saves space. A frequency of 35MHz is used to operate it.24 terminations are designed for its operation.The configuration of the board is built around 24 pins.It is estimated that there are 16 segments.The voltage of 5.5V can be supplied.There is 17V voltage output from it.In this device, there are 24 pins.Depending on its characteristics, it is classified into Display Drivers.The minimum input voltage for this device is 3V.It achieves maximum efficiency with a minimal voltage supply of 3V.Whenever the maximum supply current is allowed, the value reaches 5.5V.Whenever the supply current is lower than 40μA, it can provide high efficiency.It is important not to exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.There's an interface IC marked with LED DISPLAY DRIVER on this part.Ensure that the part output current is 35mA.
TLC5928DBQRG4 Features
Available in the SSOP package
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928DBQRG4 Applications
There are a lot of Texas Instruments TLC5928DBQRG4 LED Driver ICs applications.
- Medical surgery lighting
- White LED Backlight for portable equipment
- Street lighting
- Panel lighting
- Replacement lamps
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- LED backlight driver for LCD displays for portable equipment
- Down lights
