TLC5928PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.194W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 621mW |
| Output Current | 34mA |
| Max Supply Current | 2mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 35mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 35MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5928PW Overview
Using its 24-TSSOP (0.173, 4.40mm Width) package, it is possible to save board space. For the design of this LED driver, 16 outputs are used.Mounting is done according to the Surface Mount method.It is highly performing and reliable when it emerges as a Linear.This LED driver can be operated at a temperature of -40°C~85°C TA. A termination of 24 is used to operate the LED driver.Its configuration is based on 24 pins.The number of segments is estimated to be 16.The base part number for this LED driver is TLC5928.The supply voltage of 5.5V is an acceptable maximum value.The output voltage is 17V.24 pins are available on the device.Further, its characteristics allow it to be classified as Display Drivers.As its minimal input voltage, it operates at 3V.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.5.5V is the maximum value of supply current that can be used.If the maximum supply current is less than 2mA, the device is capable of providing high efficiency.34mA is the maximum amount of current that can be supplied to the load.Having the switching frequency at 35MHz enables this electronic component to perform at its best.
TLC5928PW Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 35MHz
TLC5928PW Applications
There are a lot of Texas Instruments TLC5928PW LED Driver ICs applications.
- Sports Facility Lighting
- LED Lightings for Inspection Devices
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Industrial LED Lighting: Image Recognition Devices
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Scanners and Handy Terminals
- Dimmable LED for vehicle interiors
- Museum lighting
