TLC5928PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.611W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.611W |
| Output Current | 35mA |
| Max Supply Current | 40mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 35MHz |
| Multiplexed Display Capability | NO |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5928PWPR Overview
To save board space, it uses the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. 16 outputs are designed into LED drivers.The mounting method adopted is Surface Mount.In this case, the Linear emerges as highly efficient and reliable.The led light driver can work at -40°C~85°C TA.24 terminations are designed for its operation.A configuration of this chip is made up of 24 pins.A total of 16 segments have been created.The LED driver is available under the part number TLC5928.It is acceptable for the voltage to be 5.5V.The output voltage of this device is 17V.This device contains 24 pins.Depending on its characteristics, it is classified into Display Drivers.This device requires a minimum voltage of 3V volts.To meet high efficiency standards, it works with a voltage of 3V.The maximum supply current is reached when 5.5V is reached.A minimal supply current is required in order for this device to provide high efficiency.A load can be supplied with 35mA current.When the switching frequency is maintained at 35MHz, this electronic component is able to fully play its functions.
TLC5928PWPR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 35MHz
TLC5928PWPR Applications
There are a lot of Texas Instruments TLC5928PWPR LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Auxiliary lights for on-vehicle cameras
- Scanners and Handy Terminals
- Street lighting
- Sports Facility Lighting
- Replacement lamps
- Architectural lighting
- Stage and Studio lighting
- Amusement Machines
- Other Electronic Devices
