TLC5928PWPRG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Pin Count | 24 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.611W |
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.611W |
| Current - Output | 35mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5928PWPRG4 Overview
The HTSSOP EP package saves space on the board. This system operates at 35MHz frequency.24 terminations are used in its operation.It is configured with 24 pins as its base.We estimate that there are 16 segments.There is no problem with the voltage of 5.5V.The output voltage is 17V.24 pins are on the device.Additionally, it can be classified as Display Drivers based on its characteristics.This device requires a minimum input voltage of 3V.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.It is possible to supply current up to 5.5V.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.Stable operation requires an operating temperature greater than -40°C.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.There is a current of 35mA can be supplied to the load.
TLC5928PWPRG4 Features
Available in the HTSSOP EP package
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928PWPRG4 Applications
There are a lot of Texas Instruments TLC5928PWPRG4 LED Driver ICs applications.
- Panel lighting
- Stage Lighting and Signage
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- LED backlight driver for LCD displays for portable equipment
- Medical surgery lighting
- LED Lightings for Industrial Equipment
- LED Lightings for Inspection Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
