TLC5928PWR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.194W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 1.194W |
| Output Current | 35mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
TLC5928PWR Overview
24-TSSOP (0.173, 4.40mm Width) saves board space. LED drivers designed using this technology use 16 outputs.In this case, mounting method is Surface Mount.With high reliability and efficiency, this emerges as a Linear.At -40°C~85°C TA, the led driver is capable of operating.The frequency of 35MHz is used as the basis for its operation.In this case, the termination value is 24.There are 24 pins on the base of this LED driver.A voltage supply less than 3V could result in undetermined failures.Segments counted are 16.The device has been mounted on the Surface Mount.There is a base part number TLC5928 for this LED driver.5.5V is an acceptable maximum value for the supply voltage.It produces a voltage of 17V volts.24 pins are on the device.Additionally, it is categorized into Display Drivers according to its characteristics.For maximum efficiency, it requires a minimal supply voltage of 3V.Loads can only be powered by 35mA current.
TLC5928PWR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928PWR Applications
There are a lot of Texas Instruments TLC5928PWR LED Driver ICs applications.
- General lighting
- Constant Voltage Power Source for portable equipment
- LED backlight driver for LCD displays for portable equipment
- Medical surgery lighting
- Other Electronic Devices
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- High-end retail lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
