TLC5928RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.106W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 35MHz |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.106W |
| Output Current | 35mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5928RGER Overview
In order to save board space, the led driver uses the 24-VFQFN Exposed Pad package. Typically, LED drivers have 16 outputs.It is mounted using Surface Mount.There is no doubt that this is a very efficient and reliable Linear.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.This system operates at 35MHz frequency.In this case, the terminations are set to 24.With a base of 24, this LED light driver is configured.A total of 16 segments have been created.You can find this LED driver under the base part number TLC5928.5.5V is a reasonable voltage.Its output voltage is 17V.In this device, there are 24 pins.Further, it can be classified as Display Drivers based on its characteristics.This device requires a minimum voltage of 3V volts.A minimum supply voltage of 3V is required to meet the highest efficiency standards.Whenever the maximum supply current is allowed, the value reaches 5.5V.There is no current that can be supplied to the load.
TLC5928RGER Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928RGER Applications
There are a lot of Texas Instruments TLC5928RGER LED Driver ICs applications.
- Stage Lighting and Signage
- General lighting
- Dimmable LED for vehicle interiors
- Architectural lighting
- Medical surgery lighting
- LED Lightings for Inspection Devices
- White LED Backlight for portable equipment
- Stage and Studio lighting
- LED headlights
- Sports Facility Lighting
