TLC5928RGET
| Parameters | |
|---|---|
| Nominal Supply Current | 40μA |
| Power Dissipation | 3.106W |
| Output Current | 35mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 35 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 17 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.106W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 35MHz |
| Base Part Number | TLC5928 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
TLC5928RGET Overview
Using its 24-VFQFN Exposed Pad package, it is possible to save board space. As part of the design of this LED driver, there are 16 outputs that have been used.In order to mount the led light driver, Surface Mount is used.It is highly performing and reliable when it emerges as a Linear.It is able to work normally at the operating temperature of -40°C~85°C TA.The system operates at a frequency of 35MHz.It operates with 24 terminations.This configuration is built upon 24 pins.It is estimated that there are 16 segments.A base part number of TLC5928 is associated with this LED driver.An acceptable maximum value for the supply voltage is 5.5V.The voltage output by it is 17V.This device contains 24 pins.The Display Drivers is also assigned based on its characteristics.When the input voltage is set to 3V, it operates.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.The maximum value of supply current is 5.5V.In this case, the load can only be supplied with 35mA current.
TLC5928RGET Features
Available in the 24-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 35MHz
Supply voltage of 3.3V
TLC5928RGET Applications
There are a lot of Texas Instruments TLC5928RGET LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Street lighting
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
- A- lamps
- General lighting
- Other Electronic Devices
- Gallery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
