TLC5929DBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 20MHz |
| Base Part Number | TLC5929 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 14mA |
| Output Current | 50mA |
| Max Supply Current | 3mA |
| Voltage - Output | 10V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -2mA |
| Low Level Output Current | 2mA |
| fmax-Min | 33 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5929DBQR Overview
The board's 24-SSOP (0.154, 3.90mm Width) package saves space. LED drivers with this design have 16 outputs.In this case, mounting method is Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.-40°C~85°C TA is a valid operating temperature for the led driver.As a result, Signage is likely to benefit greatly.Based on the frequency of 20MHz, it operates.24 terminations are designed for its operation.The configuration of the board is built around 24 pins.A total of 16 segments are estimated.The base part number for this LED driver is TLC5929.In this case, 5.5V is acceptable.The device has a voltage output of 10V volts.24 pins are included in it.The Display Drivers is also assigned based on its characteristics.It operates at a voltage of 3V as its minimal input voltage.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.Supply current is limited to 5.5V at its maximum value.When the maximum supply current is less than 3mA, the device is able to provide a high level of efficiency.There is no current available to supply to the load.In order to power systems, 3.3V voltage is needed.
TLC5929DBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 20MHz
Supply voltage of 3.3V
Operating with the supply voltage of 3.3V
TLC5929DBQR Applications
There are a lot of Texas Instruments TLC5929DBQR LED Driver ICs applications.
- Gallery lighting
- Scanners and Handy Terminals
- Sports Facility Lighting
- LED headlights
- Medical surgery lighting
- Dimmable LED for vehicle interiors
- Museum lighting
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Street lighting
