TLC5930PWPRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.7W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 25MHz |
| Base Part Number | TLC5930 |
| Pin Count | 24 |
| Number of Outputs | 12 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.7W |
| Output Current | 40mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 25 MHz |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLC5930PWPRG4 Overview
It saves board space with the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. There are 12 outputs used for the design of this LED drivers.The mounting method adopted is Surface Mount.It emergys as a Linear with high efficiency and reliable performance.It is able to work normally at the operating temperature of -20°C~85°C TA.25MHz is the frequency in which it operates.The terminations 24 are designed for its operation.There are 24 pins on its base.Failures may occur if the voltage supply is below 3V.Segments counted are 12.Surface Mount is mounted on it.LED drivers are found under the base part number TLC5930.3.6V is an acceptable maximum value for the supply voltage.There is 17V voltage output from it.This device contains 24 pins.According to its characteristics, it is also categorized into Display Drivers.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.The device can deliver high efficiency when the maximal supply current is less than 50mA.A load can be supplied with 40mA current.
TLC5930PWPRG4 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -20°C~85°C TA
Frequency of 25MHz
Supply voltage of 3.3V
TLC5930PWPRG4 Applications
There are a lot of Texas Instruments TLC5930PWPRG4 LED Driver ICs applications.
- Amusement Machines
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- Gallery lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
- A- lamps
- LED Lightings for Industrial Equipment
- Street lighting
- Replacement lamps
