TLC59401RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | TLC59401 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60μA |
| Power Dissipation | 3.482W |
| Output Current | 120mA |
| Max Supply Current | 6mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC59401RHBT Overview
In order to save board space, the led driver uses the 32-VFQFN Exposed Pad package. In this LED driver, there are 16 outputs.Surface Mount is used to mount the led driver.In this case, the result is a Linear with high efficiency.At -40°C~85°C TA, the led driver is capable of operating.It is clear that Backlight, Signage will benefit from the program.Using the frequency of 30MHz, it operates.It operates with terminations of 32.The LED light driver is configured with a base of 0 pins.It consists of 16 segments.Part number TLC59401 represents this LED driver.The voltage of 5.5V is acceptable.A voltage output of 17V is provided by this device.A device with 32 pins is available.According to its characteristics, it is also categorized into Display Drivers.A voltage of 3V is its minimal input voltage.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 3V.In the presence of a maximum supply current, the value of 5.5V will be reached.Its high efficiency is based on the fact that the maximal supply current should not exceed 6mA.It is possible to supply the load with 120mA current.
TLC59401RHBT Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC59401RHBT Applications
There are a lot of Texas Instruments TLC59401RHBT LED Driver ICs applications.
- Down lighting
- Constant Voltage Power Source for portable equipment
- Gallery lighting
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Refrigeration lighting
- Other Electronic Devices
