TLC5940NTG4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Weight | 2.063789g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | TLC5940 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Output Current | 120mA |
| Max Supply Current | 6mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 4.57mm |
| Length | 35.69mm |
| Width | 6.73mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5940NTG4 Overview
Its 28-DIP (0.300, 7.62mm) package is used to save board space. LED drivers have a total of 16 outputs that are used in the design of the drivers.It is possible to mount the led driver using Through Hole.There is no doubt that this is a very efficient and reliable Linear.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Backlight has many benefits.In this case, there are 28 terminations.This configuration is built upon 28 pins.16 segments exist.Under the base part number TLC5940, you'll find this LED driver.The voltage of 5.5V is acceptable.A 17V volt output voltage is provided by this device.It consists of 28 pins.Further, it can be classified as Display Drivers based on its characteristics.At its minimal input voltage, it operates at 3V.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.It reaches 5.5V when the maximum supply current is allowed.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 6mA.A load can be supplied with 120mA current.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.
TLC5940NTG4 Features
Available in the 28-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5940NTG4 Applications
There are a lot of Texas Instruments TLC5940NTG4 LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Down lighting
- Stage Lighting and Signage
- Industrial LED Lighting: Image Recognition Devices
- Stage and Studio lighting
- Sports Facility Lighting
- General lighting
- Portable lighting
- Medical surgery lighting
- Linear fluorescent
