TLC5940RHB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 30MHz |
| Base Part Number | TLC5940 |
| Pin Count | 32 |
| JESD-30 Code | S-PQCC-N32 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3.3/5V |
| Max Supply Current | 60mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5940RHB Overview
32-VFQFN Exposed Pad package saves space on the board. This LED driver has 16 outputs.Surface Mount is used for mounting the led light driver.The system emerges as a Linear with high efficiency.The led light driver operates normally at -40°C~85°C TA. The benefits it provides to Backlight are considerable.A frequency of 30MHz is used to operate it.There are 32 terminations that are designed to operate with it.A voltage supply less than 3V could result in undetermined failures.There are estimated to be 16 segments.I have mounted it by Surface Mount.This LED driver can be found under the base part number TLC5940.17V is the output voltage.In this device, there are 32 pins.Additionally, it can be classified as Display Drivers based on its characteristics.When the maximum supply current is below 60mA, the device can deliver high efficiency.Systems require 5.5V voltage to operate.
TLC5940RHB Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
Operating with the supply voltage of 5.5V
TLC5940RHB Applications
There are a lot of Texas Instruments TLC5940RHB LED Driver ICs applications.
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Sports Facility Lighting
- Portable lighting
- Amusement Machines
- Auxiliary lights for on-vehicle cameras
- High-end retail lighting
- Stage and Studio lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
