TLC5940RHBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TLC5940 |
| Pin Count | 32 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Output Current | 120mA |
| Max Supply Current | 60mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 120mA |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5940RHBR Overview
On the board, there is also a 32-VFQFN Exposed Pad package that saves space.This mounting method is Surface Mount.It is highly reliable and high-performing when it emerges as a Linear.-40°C~85°C TA is the operating temperature and it works fine.There are considerable benefits for Backlight.In this case, the termination value is 32.The LED light driver is configured with a base of 0 pins.There are 16 segments in it.There is a base part number TLC5940 for this LED driver.The voltage of 5.5V can be supplied.The voltage at the output terminal is 17V.There are 32 pins on this device.According to its characteristics, it is also classified into Display Drivers.Initially, it accepts a voltage of 3V.The maximum efficiency standards can be met by operating at the minimal voltage of 3V during operation.The maximum supply current is 5.5V.It is capable of delivering high efficiency when the maximal supply current is below 60mA.It is possible to supply the load with 120mA current.The electronic component can fully perform its functions if the switching frequency is maintained at 30MHz.
TLC5940RHBR Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 5V
Switching frequency of 30MHz
TLC5940RHBR Applications
There are a lot of Texas Instruments TLC5940RHBR LED Driver ICs applications.
- Portable lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lighting
- A- lamps
- Linear fluorescent
- General lighting
- Sports Facility Lighting
- LED Lightings for Industrial Equipment
- Flicker-free LED Lighting using R1580N
- Auxiliary lights for on-vehicle cameras
