TLC5940RHBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | TLC5940 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Output Current | 120mA |
| Max Supply Current | 60mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | OPEN-DRAIN |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5940RHBRG4 Overview
Its 32-VFQFN Exposed Pad package is used to save board space. The LED driver's design uses 16 outputs.As a mounting method, Surface Mount is used.When it emerges as a Linear, it shows high-performance and reliability.If the led driver ic is set to -40°C~85°C TA, it will work normally.Backlight has many benefits.A frequency of 30MHz is used to operate it.A termination of 32 is used to operate the LED driver.There are 32 pins used to form the base of its configuration.There are 16 segments in it.It is under the base part number TLC5940 that the LED driver can be found.5.5V is a reasonable voltage.The output voltage is 17V.A device with 32 pins is available.According to its characteristics, it is also categorized into Display Drivers.At a voltage of 3V, it operates at a minimal input voltage.To meet high efficiency standards, it works with a voltage of 3V.The maximum supply current is 5.5V.It is capable of delivering high efficiency when the maximal supply current is below 60mA.120mA is the maximum current the load can handle.
TLC5940RHBRG4 Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
TLC5940RHBRG4 Applications
There are a lot of Texas Instruments TLC5940RHBRG4 LED Driver ICs applications.
- Stage Lighting and Signage
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- OLED power supply for portable equipment
- High-end retail lighting
- Portable lighting
- Scanners and Handy Terminals
- Panel lighting
- Linear fluorescent
- Street lighting
