banner_page

TLC5941NT

3.3/5V 2.54mm PMIC TLC5941 28 Pin 30MHz 5V 28-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TLC5941NT
  • Package: 28-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 699
  • Description: 3.3/5V 2.54mm PMIC TLC5941 28 Pin 30MHz 5V 28-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 28-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 28
Weight 2.063789g
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Type Linear
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Backlight, Signage
HTS Code 8542.39.00.01
Subcategory Display Drivers
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 30MHz
Base Part Number TLC5941
Pin Count 28
Number of Outputs 16
Power Supplies 3.3/5V
Max Supply Voltage 5.5V
Min Supply Voltage 3V
Nominal Supply Current 60mA
Output Current 80mA
Max Supply Current 60mA
Voltage - Output 17V
Topology Shift Register
Min Input Voltage 3V
Max Input Voltage 5.5V
Internal Switch(s) Yes
High Level Output Current -1mA
Low Level Output Current 1mA
Number of Segments 16
Switching Frequency 30MHz
Multiplexed Display Capability NO
Height Seated (Max) 5.08mm
Length 35.69mm
Width 7.62mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TLC5941NT Overview


It saves board space with the 28-DIP (0.300, 7.62mm) package. LED drivers have a total of 16 outputs that are used in the design of the drivers.The mounting method adopted is Through Hole.With high efficiency, it appears as a Linear.At -40°C~85°C TA, the led driver is capable of operating.Backlight, Signage has considerable advantages.As a result, it operates in accordance with the frequency of 30MHz.It operates with 28 terminations.To form its configuration, 28 pins are used.16 segments are present.It's under the TLC5941 base part number.The voltage of 5.5V can be supplied.A voltage of 17V is produced by it.In this device, there are 28 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.A minimal input voltage of 3V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.In terms of supply current, there is a maximum value of 5.5V.It is possible to provide high efficiency when the maximal supply current is less than 60mA.The load is capable of receiving 80mA current.As long as the switching frequency is maintained at 30MHz, this electronic component is able to perform all of its functions properly.

TLC5941NT Features


Available in the 28-DIP (0.300, 7.62mm) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 5V
Switching frequency of 30MHz

TLC5941NT Applications


There are a lot of Texas Instruments TLC5941NT LED Driver ICs applications.

  • Linear fluorescent
  • High-end retail lighting
  • Flicker-free LED Lighting using R1580N
  • Auxiliary lights for on-vehicle cameras
  • Amusement Machines
  • Stage Lighting and Signage
  • Sports Facility Lighting
  • LED Lightings for Industrial Equipment
  • Museum lighting
  • LED backlight driver for LCD displays for portable equipment

Write a review

Note: HTML is not translated!
    Bad           Good