TLC5941PWPRG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Current - Output | 80mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5941PWPRG4 Overview
The HTSSOP EP package saves space on the board. It operates on the basis of the frequency of 30MHz.In this case, the terminations are set to 28.This LED driver is configured with a base of 28 pins.The segment count is 16.The supply voltage of 5.5V is an acceptable maximum value.17V is the voltage output.There are 28 pins on it.In addition, it can be classified as Display Drivers according to its characteristics.A minimal input voltage of 3V is required for it to operate.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 3V.5.5V is the maximum value of supply current that can be used.When the maximum supply current is below 60mA, the device can deliver high efficiency.Operating temperatures should not exceed 85°C in order to ensure stable operation.For stable operation, the operating temperature should be higher than -40°C.This part is equipped with an interface IC marked with LED DISPLAY DRIVER.The part output current should be kept at 80mA.
TLC5941PWPRG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5941PWPRG4 Applications
There are a lot of Texas Instruments TLC5941PWPRG4 LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Replacement lamps
- Constant Voltage Power Source for portable equipment
- Other Electronic Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Linear fluorescent
- OLED power supply for portable equipment
- Down lighting
- Industrial LED Lighting: Image Recognition Devices
- Stage Lighting and Signage
