TLC5941QPWPRQ1
| Parameters | |
|---|---|
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight, Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5941 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 60mA |
| Power Dissipation | 3.958W |
| Output Current | 61mA |
| Max Supply Current | 60mA |
| Quiescent Current | 900μA |
| Voltage - Output | 17V |
| Topology | Shift Register |
TLC5941QPWPRQ1 Overview
To save board space, it uses the 28-PowerTSSOP (0.173, 4.40mm Width) package. LED drivers design with 16 outputs.It adopts the way of Surface Mount for mounting.It emerges as a Linear, which is efficient and reliable.The led light driver is capable of working normally at -40°C~125°C TJ.Backlight, Signage has many benefits.In this case, the frequency is 30MHz.For its operation, 28 terminations are designed.It has a base of 28 pins.The number of segments is 16.Under the base part number TLC5941, you will find this LED driver.It is acceptable for the supply voltage to be 5.5V.The voltage at the output terminal is 17V.On this device, there are 28 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.It operates with the minimal input voltage of 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.When the maximum supply current is allowed, the value reaches 5.5V.If the maximum supply current is less than 60mA, the device is capable of providing high efficiency.The current that can be supplied to the load is 61mA.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.In the absence of external factors, there is 900μA consumption of current.
TLC5941QPWPRQ1 Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TJ
Frequency of 30MHz
Supply voltage of 5V
TLC5941QPWPRQ1 Applications
There are a lot of Texas Instruments TLC5941QPWPRQ1 LED Driver ICs applications.
- High-end retail lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- Dimmable LED for vehicle interiors
- Museum lighting
- LED Lightings for Inspection Devices
- Linear fluorescent
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- LED Lightings for Industrial Equipment
