TLC5942PWP
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.958W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TLC5942 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Interface | Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.958W |
| Output Current | 50mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5942PWP Overview
In order to save board space, the led driver uses the 28-PowerTSSOP (0.173, 4.40mm Width) package. LED drivers have a total of 16 outputs that are used in the design of the drivers.To mount, use Surface Mount.Initially, it emerges as a Linear with high efficiency and a high degree of reliability.The LED driver is capable of operating at a temperature of -40°C~85°C TA.The benefits are considerable for Backlight.In this case, there are 28 terminations.This LED driver is configured with a base of 28 pins.The number of segments is 16.LED drivers are found under the base part number TLC5942.5.5V is a maximum acceptable voltage for the supply.The output voltage of this device is 17V.It consists of 28 pins.According to its characteristics, it is also classified into Display Drivers.At a voltage of 3V, it operates at a minimal input voltage.A minimum supply voltage of 3V is required to meet the highest efficiency standards.When the maximum supply current is allowed, it reaches 5.5V.As long as the maximum supply current is under 50mA, it can deliver high efficiency.50mA is the maximum current the load can handle.Having the switching frequency at 30MHz enables this electronic component to perform at its best.
TLC5942PWP Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5942PWP Applications
There are a lot of Texas Instruments TLC5942PWP LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- General lighting
- Other Electronic Devices
- Portable lighting
- Museum lighting
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Architectural lighting
- Down lighting
- Linear fluorescent
