TLC5942PWPR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.958W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Base Part Number | TLC5942 |
| Pin Count | 28 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.958W |
| Output Current | 50mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLC5942PWPR Overview
The 28-PowerTSSOP (0.173, 4.40mm Width) package is used for saving board space. It has 16 outputs for LED drivers.In this case, mounting method is Surface Mount.This emerges as a Linear with high efficiency and reliability.LED drivers capable of operating at -40°C~85°C TA can be used.Taking advantage of Backlight has considerable benefits.It operates on the basis of the frequency of 30MHz.In this case, the terminations are set to 28.With 28 pins at the base, this LED driver has a base configuration.There are 16 segments in it.Under the base part number TLC5942, you will find this LED driver.5.5V is a maximum acceptable voltage for the supply.It produces a voltage of 17V volts.The device has 28 pins.Depending on its characteristics, it is classified into Display Drivers.With a minimum input voltage of 3V volts, it can operate.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.Currently, the supply current can only reach 5.5V.When the maximum supply current is less than 50mA, this device is capable of providing high efficiency.50mA is the maximum amount of current that can be supplied to the load.
TLC5942PWPR Features
Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5942PWPR Applications
There are a lot of Texas Instruments TLC5942PWPR LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Sports Facility Lighting
- A- lamps
- Flicker-free LED Lighting using R1580N
- Other Electronic Devices
- Stage Lighting and Signage
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
