TLC5942RHBR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 30MHz |
| Base Part Number | TLC5942 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.482W |
| Output Current | 50mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TLC5942RHBR Overview
Save board space with 32-VFQFN Exposed Pad package. LED drivers are designed with 16 outputs.To mount, use Surface Mount.It emergys as a Linear with high efficiency and reliable performance.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Backlight has significant advantages.A frequency of 30MHz is used as the basis for operation.The operation of this system is supported by 32 terminations.It is configured with 32 pins as its base.There are estimated to be 16 segments.You can find this LED driver under the base part number TLC5942.The voltage of 5.5V is acceptable.This device has an output voltage of 17V volts.There are 32 pins on this device.According to its characteristics, it is also classified into Display Drivers.This device operates with a minimum input voltage of 3V volts.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.The maximum supply current is 5.5V.As long as the supply current is less than 50mA, this device can provide high efficiency.There is no current that can be supplied to the load.
TLC5942RHBR Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5942RHBR Applications
There are a lot of Texas Instruments TLC5942RHBR LED Driver ICs applications.
- Stage Lighting and Signage
- A- lamps
- Linear fluorescent
- Scanners and Handy Terminals
- Down lighting
- Museum lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
