TLC5943PWPG4
| Parameters | |
|---|---|
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 28 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 3.958W |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.958W |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Interface IC Type | LED DISPLAY DRIVER |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| Number of Segments | 16 |
| Height | 1.15mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TLC5943PWPG4 Overview
It saves board space with the HTSSOP EP package. Based on the frequency of 30MHz, it operates on the basis of a pulse.28 terminations are used in its operation.A configuration of this chip is made up of 28 pins.A total of 16 segments are estimated.5.5V is a maximum acceptable voltage for the supply.The output voltage is 17V.It is equipped with 28 pin count.As a result, it can also be classified as Display Drivers.As its minimal input voltage, it operates at a voltage of 3V.To meet highest efficiency standards, it works on a supply voltage of 3V.5.5V is the maximum value of supply current that can be used.In order to maintain maximum efficiency, the supply current cannot exceed 50mA.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.It comes with an interface chip marked LED DISPLAY DRIVER.
TLC5943PWPG4 Features
Available in the HTSSOP EP package
Frequency of 30MHz
Supply voltage of 5V
TLC5943PWPG4 Applications
There are a lot of Texas Instruments TLC5943PWPG4 LED Driver ICs applications.
- Refrigeration lighting
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Scanners and Handy Terminals
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- High-end retail lighting
