TLC5943RHBR
| Parameters | |
|---|---|
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5943 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.482W |
| Output Current | 50mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
TLC5943RHBR Overview
Save board space with 32-VFQFN Exposed Pad package. Using this LED driver, there are 16 outputs.In this case, mounting method is Surface Mount.It emerges as a Linear with high efficiency.It is capable of working normally at -40°C~85°C TA.There are many benefits for Backlight.Based on the frequency of 30MHz, it operates.For its operation, terminations with a value of 0 are used.This module has 32 pins as its base.We estimate that there are 16 segments.The LED driver can be found under the base part number TLC5943.5.5V is an acceptable voltage.The output voltage of this device is 17V.In addition, it has 32 pins.It is also classified into Display Drivers according to its characteristics.This device requires a minimum input voltage of 3V.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.Supply current cannot exceed 5.5V.When the maximum supply current is less than 50mA, this device is capable of providing high efficiency.It is possible to supply the load with 50mA current.
TLC5943RHBR Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5943RHBR Applications
There are a lot of Texas Instruments TLC5943RHBR LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- Sports Facility Lighting
- Portable lighting
- Stage and Studio lighting
- OLED power supply for portable equipment
- Panel lighting
- Architectural lighting
- Stage Lighting and Signage
- Amusement Machines
