TLC5943RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 71.809342mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 3.482W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 30MHz |
| Base Part Number | TLC5943 |
| Pin Count | 32 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Power Dissipation | 3.482W |
| Output Current | 50mA |
| Max Supply Current | 50mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| High Level Output Current | -1mA |
| Low Level Output Current | 5mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5943RHBT Overview
32-VFQFN Exposed Pad package saves space on the board. Typically, LED drivers have 16 outputs.The led light driver is mounted using Surface Mount.This emerges as a Linear with high efficiency and reliability.LED drivers capable of operating at -40°C~85°C TA can be used.As a result, Backlight is likely to benefit greatly.The system operates at a frequency of 30MHz.The terminations 32 are designed for its operation.The LED light driver has a base configuration of 32 pins.The number of segments is estimated to be 16.The LED driver can be found under the base part number TLC5943.It is acceptable to supply voltages of 5.5V.This device has an output voltage of 17V volts.32 pins are on the device.Furthermore, it can be categorized as Display Drivers based on its characteristics.This device requires a minimum voltage of 3V volts.The system works with a minimum supply voltage of 3V in order to achieve maximum efficiency.In terms of supply current, there is a maximum value of 5.5V.In order to maintain maximum efficiency, the supply current cannot exceed 50mA.You can supply 50mA current to the load.
TLC5943RHBT Features
Available in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 30MHz
Supply voltage of 3.3V
TLC5943RHBT Applications
There are a lot of Texas Instruments TLC5943RHBT LED Driver ICs applications.
- Refrigeration lighting
- Other Electronic Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- Dimmable LED for vehicle interiors
- A- lamps
- Stage and Studio lighting
- Panel lighting
- OLED power supply for portable equipment
- Stage Lighting and Signage
